• Welcome to Religious Forums, a friendly forum to discuss all religions in a friendly surrounding.

    Your voice is missing! You will need to register to get access to the following site features:
    • Reply to discussions and create your own threads.
    • Our modern chat room. No add-ons or extensions required, just login and start chatting!
    • Access to private conversations with other members.

    We hope to see you as a part of our community soon!

Spooky!

Mock Turtle

Oh my, did I say that!
Premium Member
So, an interior door hangs by two hinges, with the pin that holds the two parts of any hinge being inserted from above so as to form the complete hinge. So simple.

So why would I suddenly discover that the pin (lower hinge) of one door has suddenly and inexplicably risen from its position (completely out) so as the hinge to become useless?

I have enough on my plate at the moment so as to deal with spookies! :(

Explanations please - apart from nasty burglars and such - or did I just not notice that it was incrementally easing it way north over time?

PS I fixed it.
 

ChristineM

"Be strong", I whispered to my coffee.
Premium Member
You didn't notice,

We've had it happen, the guy who fixed it for us said it was friction, each time the door opened the pin worked up a little, and doesn't drop back when closed. Solution, wipe pin with a little oil before refitting.

Worked for us
 

Mock Turtle

Oh my, did I say that!
Premium Member
You didn't notice,

We've had it happen, the guy who fixed it for us said it was friction, each time the door opened the pin worked up a little, and doesn't drop back when closed. Solution, wipe pin with a little oil before refitting.

Worked for us
No, I did notice the creaking and probably should have paid attention to such. :D Best explanation for this, and some WD40 used more often might have prevented this from happening. But I'll still blame the gremlins. :oops:
 
Last edited:

Nakosis

Non-Binary Physicalist
Premium Member
So, an interior door hangs by two hinges, with the pin that holds the two parts of any hinge being inserted from above so as to form the complete hinge. So simple.

So why would I suddenly discover that the pin (lower hinge) of one door has suddenly and inexplicably risen from its position (completely out) so as the hinge to become useless?

I have enough on my plate at the moment so as to deal with spookies! :(

Explanations please - apart from nasty burglars and such - or did I just not notice that it was incrementally easing it way north over time?

PS I fixed it.

I've had doors do that too.
I just assumed it was a slow process that I didn't notice.
mysterious moving door hinge
 

Mock Turtle

Oh my, did I say that!
Premium Member
I've had doors do that too.
I just assumed it was a slow process that I didn't notice.
mysterious moving door hinge
I think you and @ChristineM are right, that a pin could ease itself out against gravity by essentially screwing its way out of the hinge. It was just such a shock on discovering this. First time it has ever happened for me - but then not all doors or hinges are the same. :oops:
 

Vinayaka

devotee
Premium Member
We put it on our calendar to do an annual door hinge check. Five minutes with a hammer puts them all back to normal.
 

Stonetree

Abducted Member
Premium Member
So, an interior door hangs by two hinges, with the pin that holds the two parts of any hinge being inserted from above so as to form the complete hinge. So simple.

So why would I suddenly discover that the pin (lower hinge) of one door has suddenly and inexplicably risen from its position (completely out) so as the hinge to become useless?

I have enough on my plate at the moment so as to deal with spookies! :(

Explanations please - apart from nasty burglars and such - or did I just not notice that it was incrementally easing it way north over time?

PS I fixed it.
The lower hinge tends to bear more of the weight of the door. The problem is even worse if the door frame is too wide; potentially causing the door to lean even farther at the top. The older the wooden frame, the more the metal screws and the weight of the door can cause the door to lean at the top.
 
Last edited:

Mock Turtle

Oh my, did I say that!
Premium Member
The lower hinge tends to bare more of the weight of the door. The problem is even worse if the door frame is too wide; potentially causing the door to lean even farther at the top. The older the wooden frame, the more the metal screws and the weight of the door can cause the door to lean at the top.
Just seems like a normal door, if one used most frequently. But I was ignoring the warning signs, or sounds. Not any more though. :oops:
 

Mock Turtle

Oh my, did I say that!
Premium Member
As far as I know it's just as normal as the screws holding door handles and locks in place loosening over time.
Probably is, but I've never had that happen either. And it is probably more about some hinges having a removable pin - useful for removing doors easily when trying to get large objects through - and those not having such. Given that I mostly have encountered the latter.
 

Shadow Wolf

Certified People sTabber & Business Owner
Probably is, but I've never had that happen either. And it is probably more about some hinges having a removable pin - useful for removing doors easily when trying to get large objects through - and those not having such. Given that I mostly have encountered the latter.
May just not have noticed. This thread got me curios and I noticed yesterday two hinges in my own home working their way up.
 
Top